Day to day I quite often develop for and work with self hosted WordPress installs, a number of which I host myself; all of the installs that I manage have the Jetpack plugin by Automattic installed which alongside the many beneficial features it provides, also tells you in your dashboard how many malicious login attempts have been blocked.
Now that number (413 in the above screenshot) can look alarmingly high to anyone who doesn't already realise that any publicly facing, internet connected device faces the risk of a continual onslaught of attempted attacks from a variety of sources. For those of you up until this sentence thinking it was high, it's not, however the number of malicious login attempts against one of the WordPress powered sites is not the subject of this article, defending WordPress against them using fail2ban is.
While Jetpack words the status as "blocked malicious login attempts," I wanted to add another layer of security before that in the form of a fail2ban jail. Fail2ban is a service that you configure to watch log files and block ip addresses via the firewall based upon rules that you define e.g. too many login attempts. Out of the box fail2ban has rules that can protect services such as ftp and ssh from bruit force login attempts and it is very easy to write your own if you know a little bit of regex[1].
If you haven't already got fail2ban installed you can do it from your linux package manager, in Debian (and Debian derivatives such as Ubuntu) it is the following command[2]:
sudo apt-get install fail2ban
For more detailed information on installing fail2ban (on Debian or derivative thereof) please visit this link.
Identifying attacks
Wordpress, for reasons only known by the core team[3] will always respond to an invalid authentication attempt with a 200 OK
status code rather than a 403 Forbidden
. What this means is that from looking at your server logs alone you are unable to determine a legitimate log in from a failed attempt; fortunately WordPress has a wp_login_failed
event that the following simple mu-plugin[4] code hooks into and changes the status header.
function my_login_failed_403() {
status_header( 403 );
}
add_action( 'wp_login_failed', 'my_login_failed_403' );
In your wp-content/mu-plugins
(or where ever you have configured your mu-plugins directory to be, I am looking at you roots bedrock users) create a new file called security.php
and paste the above code after prepending it with <?php
. Once installed you will start seeing 403 errors in your log for every failed login like so:
[03/Apr/2015:05:58:01 +0100] "GET /wp-login.php HTTP/1.1" 403 3069 "-" "Mozilla/5.0 (Windows NT 6.1; rv:36.0) Gecko/20100101 Firefox/36.0"
Fail2ban Wordpress Definition
Now that failed login attempts are easily identified you can define a new filter. In the folder /etc/fail2ban/filter.d/
create a new file called wordpress-auth.conf
and paste the following into it:
# WordPress brute force auth filter: /etc/fail2ban/filter.d/wordpress-auth.conf:
# Block IPs trying to auth wp wordpress
#
# Matches e.g.
# 10.20.30.40 - [21/Apr/2015:21:18:42] "POST /wp/wp-login.php HTTP/1.0" 403 4521
# 15.27.31.45 - [21/Apr/2015:21:18:46] "POST /wp/xmlrpc.php HTTP/1.0" 403 4521
#
[Definition]
failregex = <HOST>.*POST.*(wp-login\.php|xmlrpc\.php).* 403
ignoreregex =
Once the filter has been created you need to then create /etc/fail2ban/jail.local
if it doesn't already exist – some installs do not create it by default by fail2ban will load it if it exists.
Within jail.local
paste the following:
[wordpress]
enabled = true
port = http,https
filter = wordpress-auth
logpath = /srv/vhosts/example.com/logs/access.log
maxretry = 8
bantime = 3600
The above translatates to: Initiate a new jail called wordpress
enable it on both http
and https
using the filter defined as wordpress-auth
against the logfile found at /srv/vhosts/example.com/logs/access.log
; if there are 8
or more failed attempts (matches against the wordpress-auth
filter) then black list the host for 3600
seconds (1 hour.)[5]
You will need to change the logpath
entry from the example I have shown in the snippet above to the location of your WordPress blogs access log as output by your web server[6]. Once configured you can test the filter by using the fail2ban-regex
command line tool using the following syntax:
fail2ban-regex <logfile> <fail2ban filter to test>
To use fail2ban-regex
on the sample log file shown above with the new wordpress-auth
filter you would execute the following on your terminal:
fail2ban-regex /srv/vhosts/example.com/logs/access.log /etc/fail2ban/filter.d/wordpress-auth.conf
The length of time that the test takes will be dependant upon the size of the log file being tested against, if you do not already do so, I would recommend the setting up of logrotate for your log files. Once the test is complete you will see output on your terminal looking something like the below:
So long as the output finishes with "Success, the total number of match is" followed by the number of any matches, then the filter has passed the test. You can always, if you havent already do a failed log in to your wordpress install to see the count of matches increase; however so long as the test finishes with a success there is no need.
Restart fail2ban and verify
Once you are happy that the filter is working you can restart the fail2ban service by executing the command sudo service fail2ban restart
and check that the fail2ban rule is active in iptables[7] by executing the command sudo iptables -vnL
. Within the iptables output under the target column you should see a fail2ban-wordpress
rule which shows that fail2ban is working correctly with the iptables firewall.
Caveats
This method works, and it works well. However you will need to create a jail for each unique access log; meaning if you have ten WordPress installs with ten separate access logs you will need ten fail2ban jails – something that can get quite monotonous and possibly slow fail2bans performance. This can be easily remedied by creating a shared login access log that all of your WordPress installs write to. In the future I will be writing on how I went about implementing this using PHP openlog; until then, if you have any questions or feedback please do leave a comment below.
For the record, I know just enough regex not to shoot myself in the foot with it, but not enough to be considered a guru. ↩︎
Or drop the
sudo
if your running as root ↩︎This ticket explains a little bit more about the thinking behind the 200 response; ↩︎
mu-plugins are must use plugins and will always be loaded by WordPress, click here to read more ↩︎
fail2ban uses the
bantime
as the duration in which the max re-trys can be done within, so this also translates to no more than 8 failed attempts in one hour ↩︎The filter I have included is designed to work with the default nginx access log format, it shouldn't be difficult to change it to work for Apache, if in doubt refer to foot note #1 ↩︎
I am assuming that you have fail2ban configured to use iptables, if you have configured it otherwise then I also assume that you know what you are doing and are therefore simply visiting this page for reference. ↩︎